GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-1519004.png)
13. REMOVE ABSORBER CONTROL ACTUATOR
a. Turn the absorber control actuator counterclockwise approximately 40 degrees to remove it.
14. REMOVE REAR SHOCK ABSORBER WITH COIL SPRING
a. Loosen the lock nut of the rear shock absorber.
NOTICE:
^
Do not remove the lock nut.
^
Loosen the lock nut only when disassembling the rear shock absorber with coil spring.
b. Remove the 3 nuts on the upper side of the rear shock absorber with coil spring.
c. Remove the 2 bolts and the rear shock absorber with coil spring from the body
NOTICE: During this operation, hold the rear shock absorber with coil spring to prevent it from failing.
