GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-1522003.png)
9. REMOVE DIFFERENTIAL NO. 2 SUPPORT PROTECTOR
a. Remove the 2 nuts and the differential No. 2 support protector.
10. REMOVE REAR SUSPENSION MEMBER BRACE
a. Remove the 2 bolts and rear suspension member brace.
11. REMOVE REAR SUSPENSION NO. 2 ARM
a. Loosen the nut on the rear suspension member side.
NOTICE: Do not remove the nut.
b. Remove the bolt and nut and disconnect the rear stabilizer link assembly and the load sensing valve sensor bracket.
c. Remove the bolt and nut and disconnect the rear shock absorber.
NOTICE: Turn the bolt while holding the nut.
d. Remove the nut and bolt on the rear axle carrier side.
NOTICE: Turn the bolt while holding the nut.
12. REMOVE REAR SHOCK ABSORBER CAP
a. Remove rear shock absorber cap and disconnect the connector.
