GS 300 RWD V6-3.0L (3GR-FSE) (2006)
20. REMOVE REAR WHEEL BEARING DUST DEFLECTOR NO. 2
a. Using a screwdriver, remove the bearing dust deflector No. 2 from the rear axle carrier sub-assembly.
21. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY
a. Hold the axle hub and bearing assembly in a vise between aluminum plates.
NOTICE: Do not overtighten the vise.
b. Remove the 4 bolts and axle hub and bearing assembly from the rear axle carrier sub-assembly.
INSTALLATION
1. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY
a. Hold the axle hub and bearing assembly in a vise between aluminum plates.
NOTICE: Do not overtighten the vise.
b. Install the axle hub and bearing assembly to the rear axle carrier sub-assembly with the 4 bolts.
Torque: 70 Nm (714 kgf-cm, 52 ft. lbs.)
2. INSTALL REAR WHEEL BEARING DUST DEFLECTOR NO. 2
a. Using SST and a hammer, install the bearing dust deflector No. 2 to the rear axle carrier sub-assembly.
SST 09951-01000, 09950-70010 (09951-07150)