GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-1530003.png)
4. INSTALL TIRE PRESSURE MONITOR ECU
a. Install the tire pressure monitor ECU with the 2 bolts.
Torque: 4.5 Nm (46 kgf-cm, 40 inch lbs.)
b. Connect the connector.
5. INSTALL RADIO RECEIVER ASSEMBLY
6. CONNECT THE CABLE TO THE NEGATIVE BATTERY TERMINAL
7. REGISTRATION OF TRANSMITTER ID
8. INSPECT TIRE PRESSURE WARNING SYSTEM
SST 09843-18040
9. PERFORM INITIALIZATION
Some systems need initialization when disconnecting the cable from the negative battery terminal.
