GS 300 RWD V6-3.0L (3GR-FSE) (2006)
5. INSTALL REAR AXLE HUB BOLT
a. Install a washer and nut to a new bolt as shown in the illustration.
b. Using a screw driver or an equivalent to hold the hub & bearing assembly, install the rear axle hub bolt by tightening the nut.
NOTICE: Do not damage the threads of the hub bolts.
6. INSTALL REAR DISC
7. ADJUST PARKING BRAKE SHOE CLEARANCE
8. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY
9. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)