GS 300 RWD V6-3.0L (3GR-FSE) (2006)
3. REMOVE POSITION INDICATOR LENS
a. Using a screwdriver, remove the position indicator lens from the position indicator housing upper.
4. REMOVE INDICATOR LAMP WIRE SUB-ASSEMBLY
a. Remove the indicator light wire sub-assembly from the position indicator lower.
b. Remove the position indicator bulb from the indicator light wire sub-assembly.
c. Remove the position indicator bulb cap from the position indicator bulb.
d. Remove the transmission control switch connector from the floor shift assembly
e. Using a screwdriver, disengage the locking lug of terminals (4) and (8), and pull the terminals out from the rear.