GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-1097007.png)
9. REMOVE TRANSMISSION CONTROL SWITCH
a. Remove the transmission control switch from the shift lever guide housing.
INSPECTION
1. INSPECT TRANSMISSION CONTROL SWITCH
Standard Resistance
a. Connect the park/neutral position switch connector.
b. Disconnect the transmission control switch connector of shift lock control unit assembly
c. Measure resistance according to the value(s) in the table when the shift lever is moved to each position.
ADJUSTMENT
1. ADJUST SHIFT LEVER POSITION
a. Remove the nut and disconnect the shifting rod.
b. Turn the control shaft lever of the neutral start switch counterclockwise until it stops, and turn it clockwise 2 notches to set it to the N position.
