GS 300 RWD V6-3.0L (3GR-FSE) (2006)
c. Install a new lock washer and the nut.
Torque: 6.9 Nm (70 kgf-cm, 61 inch lbs.)
d. Temporarily install the control shaft lever.
e. Turn the control shaft lever counterclockwise until it stops, and turn it clockwise 2 notches to set it to the N position.
f.
Remove the transmission control shaft lever.
g. Align the neutral basic line with the switch groove, and tighten the adjusting bolt.
Torque: 13 Nm (133 kgf-cm, 9 ft. lbs.)