GS 300 RWD V6-3.0L (3GR-FSE) (2006)
c. Remove the bolt and automatic transmission 3-way solenoid (S2) and automatic transmission 3-way solenoid (S4).
d. Remove the automatic transmission 3-way solenoid (S1).
e. Remove the bolt and automatic transmission 3-way solenoid (SR).
f.
Remove the bolt, lock plate and clutch control solenoid No. 1 (SL1) and line pressure control solenoid (SLT).
REASSEMBLY
1. REMOVE SHIFT SOLENOID VALVE
a. Install the clutch control solenoid No. 1 (SL1) and line pressure control solenoid (SLT) with the lock plate and bolt.
Torque: 6.4 Nm (65 kgf-cm, 57 inch lbs.)
b. Install the automatic transmission 3-way solenoid (SR) with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft. lbs.)
c. Install the automatic transmission 3-way solenoid (S1).
d. Install the automatic transmission 3-way solenoid (S2) and automatic transmission 3-way solenoid (S4) with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft. lbs.)
e. Install the automatic transmission 3-way solenoid (S3) with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft. lbs.)
f.
Install the lock up control solenoid (SLU) and clutch control solenoid (SL2) with the lock plate and bolt.
Torque: 6.4 Nm (65 kgf-cm, 57 inch lbs.)
INSTALLATION
1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
a. Install the check ball body and spring.
b. Check the accumulator pistons, check ball body and spring as shown in the illustration.