GS 300 RWD V6-3.0L (3GR-FSE) (2006)
7. REMOVE REAR AXLE ASSEMBLY LH
8. REMOVE REAR AXLE ASSEMBLY RH
HINT: Removal procedure of the RH side is the same as that of the LH side.
9. REMOVE DIFFERENTIAL SUPPORT PROTECTOR NO. 2
10. REMOVE DIFFERENTIAL SUPPORT PROTECTOR NO. 1
HINT: Removal procedure of the RH side is the same as that of the LH side.
11. REMOVE REAR SUSPENSION MEMBER BRACE LH
12. REMOVE REAR SUSPENSION MEMBER BRACE RH
HINT: Removal procedure of the RH side is the same as that of the LH side.
13. REMOVE PARKING BRAKE CABLE ASSEMBLY NO. 3
14. REMOVE PARKING BRAKE CABLE ASSEMBLY NO. 2
HINT: Removal procedure of the RH side is the same as that of the LH side.
15. REMOVE REAR DRIVE SHAFT ASSEMBLY LH
16. REMOVE REAR DRIVE SHAFT ASSEMBLY RH
HINT: Removal procedure of the RH side is the same as that of the LH side.
17. REMOVE REAR FLOOR SIDE MEMBER COVER LH
a. Remove the 2 screws and side member cover LH.
18. REMOVE REAR FLOOR SIDE MEMBER COVER RH
HINT: Removal procedure of the RH side is the same as that of the LH side.
19. DISCONNECT HEIGHT CONTROL SENSOR REAR LH
a. Disconnect the height control sensor connector.
b. Remove the clamp from the rear suspension member.