GS 300 RWD V6-3.0L (3GR-FSE) (2006)
20. REMOVE REAR SUSPENSION MEMBER ASSEMBLY
a. Support the rear suspension member with a jack.
HINT: Remove the rear suspension member along with the differential carrier assembly rear.
b. Remove the 8 bolts, 2 rear suspension member stoppers, 2 differential support member stoppers and rear suspension member stopper lowers
from the rear suspension member.
c. Lower the jack slowly and remove the rear suspension member with the differential carrier assembly rear.
21. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY
22. REMOVE NO. 1 REAR DIFFERENTIAL MOUNT CUSHION
a. Using SST, remove the No. 1 rear differential mount cushion.
SST 09570-24010,09316-12010
NOTICE:
^
Do not bring SST into contact with the subframe.
^
Do not slant the bolts of SST.
^
Set the SST in the correct direction.
^
Screw the 2 bolts of SST equally into the 2 holes of the rear differential mount.