GS 300 RWD V6-3.0L (3GR-FSE) (2006)
23. REMOVE NO. 2 REAR DIFFERENTIAL MOUNT CUSHION
a. Using SST, remove the No. 2 rear differential mount cushion.
SST 09570-24010,09316-12010
NOTICE:
^
Do not bring SST into contact with the subframe.
^
Do not slant the bolt of SST.
^
Set the SST in the correct direction.
24. INSTALL NO. 1 REAR DIFFERENTIAL MOUNT CUSHION
a. Using SST, install the No. 1 rear differential mount cushion.
SST 09570-24010
NOTICE:
^
Temporarily install the mount cushion to the member in order to prevent it from tilting and install the SST.
^
Be sure to use the SST with the correct combination.
^
Make sure that the SST contacts the entire circumference of the mount cushion.
^
Be sure to install the mount cushion so that the identification rubber mark is at the bottom.