GS 300 RWD V6-3.0L (3GR-FSE) (2006)
2. SEPARATE LOAD SENSING VALVE SENSOR BRACKET
a. Remove the bolt and nut, and separate the load sensing valve sensor bracket and stabilizer link assembly.
3. REMOVE DIFFERENTIAL SUPPORT PROTECTOR NO. 2
a. Remove the 2 nuts and differential support protector No. 2 from the suspension member brace.
4. REMOVE REAR SUSPENSION MEMBER BRACE
a. Remove the 2 bolts and suspension member brace.
5. SEPARATE PARKING BRAKE CABLE ASSEMBLY NO. 3
a. Remove the 2 bolts, and separate the parking brake cable No. 3.
6. REMOVE REAR AXLE SHAFT NUT