GS 300 RWD V6-3.0L (3GR-FSE) (2006)
3. Place matchmarks on the glass and vehicle body on the locations indicated in the illustration.
HINT:
-
Placing matchmarks is only necessary when installing new glass. If it is the reused glass, matchmarks should already be present.
-
When reusing the glass, check and correct the match mark positions.
NOTE: Check that the stoppers are attached to the vehicle body correctly.
4. Using suction cups, remove the glass.
b. Using a brush, apply Primer M to the exposed part of the vehicle body.
NOTE:
-
Allow the primer to dry for 3 minutes or more.
-
Do not apply primer to the adhesive.
-
Throw away any leftover primer.
-
Do not apply too much primer.