GS 300 RWD V6-3.0L (3GR-FSE) (2006)
b. Attach the 5 claws and 2 clips to install the ventilator louver.
4. INSTALL FRONT FENDER TO COWL SIDE SEAL LH
a. Push the cowl side seal in the direction indicated by the arrow in the illustration. Attach the 2 claws to install the cowl side seal.
5. INSTALL FRONT FENDER TO COWL SIDE SEAL RH
HINT: Use the same procedures described for the LH side.
6. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH
a. Stop the wiper motor at the automatic stop position.
b. Clean the wiper arm serration with a round file or equivalent.
c. Clean the wiper pivot serration with a wire brush.