GS 350 AWD V6-3.5L (2GR-FSE) (2009)
AUDIO / VISUAL: FRONT DOOR SPEAKER: REMOVAL
REMOVAL
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed below are for the LH side.
1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Removal
2. REMOVE FRONT DOOR TRIM PANEL ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Removal
3. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 3 screws and speaker.
HINT: Do not touch the cone part of the speaker.
Installation
AUDIO / VISUAL: FRONT DOOR SPEAKER: INSTALLATION
INSTALLATION
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed below are for the LH side.
1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY
(a) Temporarily install the speaker by attaching the claws of the speaker to the door panel.
(b) Install the speaker with the 3 screws.
HINT:
-
Install the screws in the order shown in the illustration.
-
Do not touch the cone part of the speaker.
(c) Connect the connector.
2. INSTALL FRONT DOOR TRIM PANEL ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Installation
3. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Installation