GS 350 AWD V6-3.5L (2GR-FSE) (2009)
Cruise Control Module: Service and Repair
Removal
CRUISE CONTROL: DISTANCE CONTROL ECU: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal
3. REMOVE DISTANCE CONTROL ECU ASSEMBLY
(a) Disconnect the connector.
(b) Remove the nut and distance control ECU.