GS 350 AWD V6-3.5L (2GR-FSE) (2009)
/Page-754002.png)
(a) Install the motor with the 3 screws.
Torque: 3.8 Nm (39 kgf-cm, 34 in-lbf)
(b) Connect the ECU connector.
2. INSTALL NO. 1 COOLING FAN MOTOR
(a) Install the motor with the 3 screws.
Torque: 2.6 Nm (27 kgf-cm, 21 in-lbf)
(b) Connect the ECU connector.
3. INSTALL NO. 2 FAN
(a) Install the fan with the nut.
Torque: 6.2 Nm (63 kgf-cm, 55 in-lbf)
4. INSTALL NO. 1 FAN
(a) Install the fan with the nut.
Torque: 6.2 Nm (63 kgf-cm, 55 in-lbf)
5. CHECK COOLING FAN MOTOR OPERATION
(a) Check the No. 1 and No. 2 cooling fan motor operation.
(1) Check that the fan rotates smoothly by hand.
