GS 350 AWD V6-3.5L (2GR-FSE) (2009)
/Page-712001.png)
Variable Valve Timing Actuator Position Sensor: Service and Repair
Installation
2GR-FSE ENGINE CONTROL SYSTEM: VVT SENSOR: INSTALLATION
INSTALLATION
1. INSTALL VVT SENSOR (for Exhaust Side of Bank 2)
(a) Install the sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the sensor connector.
2. INSTALL VVT SENSOR (for Intake Side of Bank 2)
(a) Install the sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the sensor connector.
3. INSTALL VVT SENSOR (for Exhaust Side of Bank 1)
(a) Install the sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the sensor connector.
4. INSTALL VVT SENSOR (for Intake Side of Bank 1)
(a) Install the sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
