GS 350 AWD V6-3.5L (2GR-FSE) (2009)
Variable Valve Timing Actuator: Service and Repair
Installation
2GR-FSE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY: INSTALLATION
INSTALLATION
1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Exhaust Side of Bank 2)
(a) Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.
(b) Install the oil control valve with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
NOTE:
Be careful that the O-ring is not cracked or jumped when installing the oil control valve.
(c) Connect the camshaft timing oil control valve connector.
(d) Install the bracket with the bolt.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)
(e) Connect the wiring harness to the bracket.
2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Intake Side of Bank 2)
(a) Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.