GS 350 AWD V6-3.5L (2GR-FSE) (2009)
(b) Remove the 4 bolts, nut and water inlet.
(c) Remove the water inlet housing gasket and water outlet pipe's O-ring.
17. REMOVE NO. 1 COOLER REFRIGERANT SUCTION HOSE See: Heating and Air Conditioning/Compressor HVAC/Service and
Repair/Removal
18. REMOVE DISCHARGE HOSE SUB-ASSEMBLY See: Heating and Air Conditioning/Compressor HVAC/Service and Repair/Removal
19. REMOVE COOLER COMPRESSOR ASSEMBLY (for 2WD) See: Heating and Air Conditioning/Compressor HVAC/Service and
Repair/Removal
20. REMOVE OIL FILTER BRACKET (for 4WD) See: Heating and Air Conditioning/Compressor HVAC/Service and Repair/Removal
21. REMOVE OIL FILTER BRACKET SUB-ASSEMBLY (for 4WD) See: Heating and Air Conditioning/Compressor HVAC/Service and
Repair/Removal
22. REMOVE COOLER COMPRESSOR ASSEMBLY (for 4WD) See: Heating and Air Conditioning/Compressor HVAC/Service and
Repair/Removal
23. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Removal
24. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY (for 2WD) See: Service and Repair/Removal and Replacement/Engine
Assembly/Removal
25. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY (for 4WD) See: Service and Repair/Removal and Replacement/Engine
Assembly/Removal
26. REMOVE WATER PUMP PULLEY
(a) Using SST, hold the water pump pulley.
SST: 09960-10010
09962-01000
09963-00700
(b) Remove the 4 bolts and water pump pulley.