GS 350 AWD V6-3.5L (2GR-FSE) (2009)
HINT: Perform the following procedures when replacing the holder.
(b) Remove the holder.
(1) Using a screwdriver, unlock the retainer.
(2) Release the fitting lance and remove the holder.
(c) Install the holder.
(1) Install the connectors to the holder. (When locking, a click sound can be heard.)
HINT: The retainer is locked when the holder is connected.
11. CONNECTION OF CONNECTOR FOR CENTER AIRBAG SENSOR ASSEMBLY
(a) Firmly insert the holder (with connectors) into the center airbag sensor assembly until it can not be pushed any further.