GS 350 AWD V6-3.5L (2GR-FSE) (2009)
License Plate Lamp: Service and Repair
Installation
LIGHTING: LICENSE PLATE LIGHT ASSEMBLY: INSTALLATION
INSTALLATION
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
1. INSTALL BACK DOOR GARNISH RETAINER SUB-ASSEMBLY
(a) Install the 2 clips and retainer to the luggage compartment door.
(b) Install the 2 screws.
2. INSTALL LICENSE PLATE LIGHT ASSEMBLY
(a) Install the license plate light and 2 screws to the luggage compartment door.
(b) Connect the connector.
3. INSTALL LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE
4. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY
(a) Install the switch and 2 screws to luggage compartment door.
(b) Connect the connector.
5. INSTALL LUGGAGE COMPARTMENT DOOR COVER
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION