GS 350 AWD V6-3.5L (2GR-FSE) (2009)
/Page-2862001.png)
Combination Switch: Testing and Inspection
LIGHTING: TURN SIGNAL LIGHT SWITCH: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. CHECK TURN SIGNAL FLASHER ASSEMBLY
(a) Disconnect the K25 connector.
(b) Measure the voltage of the wire harness side connector.
Standard voltage:
(c) Reconnect the connector.
(d) Measure the voltage of the connector.
Standard voltage:
If the result is not as specified, replace the flasher assembly.
