GS 350 AWD V6-3.5L (2GR-FSE) (2009)
(a) Check the wire harness between the headlight (turn LH) and turn signal flasher, and the headlight (turn LH) and body ground.
(1) Disconnect the K25 flasher connector.
(2) Disconnect the B11 headlight connector.
(3) Measure the resistance of the wire harness side connectors.
Standard resistance:
(b) Check the wire harness between the headlight (turn RH) and turn signal flasher, and the headlight (turn RH) and body ground.
(1) Disconnect the K25 flasher connector.
(2) Disconnect the B2 headlight connector.
(3) Measure the resistance of the wire harness side connectors.
Standard resistance:
NG -- REPAIR OR REPLACE HARNESS AND CONNECTOR
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE