GS 350 AWD V6-3.5L (2GR-FSE) (2009)
(a) Disconnect the O7 ECU connector.
(b) Measure the voltage and resistance of the wire harness side connector.
-
If the result is not as specified, there may be a malfunction on the wire harness side.
9. CHECK MULTIPLEX NETWORK DOOR ECU REAR RH (REAR DOOR RH)
(a) Disconnect the O3 ECU connector.
(b) Measure the voltage the resistance of the wire harness side connector.
-
If the result is not as specified, there may be a malfunction on the wire harness side.
10. CHECK POSITION CONTROL ECU AND SWITCH ASSEMBLY (DRIVER SIDE)