GS 350 AWD V6-3.5L (2GR-FSE) (2009)
Main Relay (Computer/Fuel System): Service and Repair
Removal
2GR-FSE ENGINE CONTROL SYSTEM: INTEGRATION RELAY: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
3. REMOVE ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
4. REMOVE INTEGRATION RELAY
(a) Remove the engine room No. 1 relay block cover.
(b) Using a screwdriver, detach the 2 claws and disconnect the integration relay from the engine room No. 2 relay block.
(c) Disconnect the 3 connectors.