GS 350 AWD V6-3.5L (2GR-FSE) (2009)
(c) Remove the 4 nuts, 2 spacers and charcoal canister.
(d) Disconnect the air inlet line hose from the charcoal canister.
(1) Push the hose firmly toward the canister side.
(2) Pinch the hose (portion A) as shown in the illustration.
(3) Pull out the hose.
NOTICE:
-
Do not use any tools in this procedure.
-
Check for any dirt and foreign matter contamination in the canister and around the hose. Clean if necessary. Foreign matter may damage
the O-rings or cause leaks in the seal between the canister and hose.