GS 350 AWD V6-3.5L (2GR-FSE) (2009)
Air Flow Meter/Sensor: Service and Repair
Removal
2GR-FSE ENGINE CONTROL SYSTEM: MASS AIR FLOW METER: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
3. REMOVE ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
4. REMOVE MASS AIR FLOW METER
(a) Disconnect the MAF meter connector.
(b) Remove the 2 screws and MAF meter.
(c) Remove the O-ring from the MAF meter.