GS 350 AWD V6-3.5L (2GR-FSE) (2009)
Air Flow Meter/Sensor: Service and Repair
Installation
2GR-FSE ENGINE CONTROL SYSTEM: MASS AIR FLOW METER: INSTALLATION
INSTALLATION
1. INSTALL MASS AIR FLOW METER
(a) Install a new O-ring to the MAF meter.
(b) Install the MAF meter with the 2 screws.
(c) Connect the MAF meter connector.
2. INSTALL ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
3. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.