GS 350 AWD V6-3.5L (2GR-FSE) (2009)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Installation
AIR CONDITIONING: AMBIENT TEMPERATURE SENSOR: INSTALLATION
INSTALLATION
1. INSTALL AMBIENT TEMPERATURE SENSOR
(a) Install the sensor with the clamp.
(b) Connect the connector.
2. INSTALL FRONT BUMPER COVER See: Body and Frame/Bumper/Front Bumper/Service and Repair/Installation
3. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.