GS 350 AWD V6-3.5L (2GR-FSE) (2009)
A760H AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITION SWITCH: REMOVAL
REMOVAL
1. SEPARATE CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT EXHAUST PIPE ASSEMBLY
See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Removal
3. REMOVE PROPELLER W/CENTER BEARING SHAFT ASSEMBLY
See: Transmission and Drivetrain/Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Rear Propeller Shaft
Assembly/Removal
4. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/A760H Automatic Transmission/Transmission Assembly/Removal
5. SUPPORT AUTOMATIC TRANSMISSION ASSEMBLY See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and
Repair/Removal and Replacement/A760H Automatic Transmission/Transmission Assembly/Removal
6. SEPARATE ENGINE REAR MOUNTING MEMBER See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and
Repair/Removal and Replacement/A760H Automatic Transmission/Transmission Assembly/Removal
7. REMOVE NEUTRAL START SWITCH ASSEMBLY
(a) Tilt down the transmission.
(b) Disconnect the neutral start switch connector.
(c) Using a screwdriver, unstake the lock washer.
(d) Remove the lock nut and lock washer.
(e) Remove the bolt and neutral start switch assembly.