GS 350 AWD V6-3.5L (2GR-FSE) (2009)
/Page-486002.png)
A760E AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITION SWITCH: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE NO. 2 ENGINE UNDER COVER
3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Move the shift lever to the N position.
(b) Disconnect the park/neutral position switch connector.
(c) Remove the nut and transmission control shaft lever.
(d) Using a screwdriver, bend the tabs of the lock washer.
(e) Remove the lock nut and lock washer.
