GS 350 AWD V6-3.5L (2GR-FSE) (2009)
Auxiliary Power Outlet: Service and Repair
Installation
OTHER SYSTEM: CENTER POWER OUTLET SOCKET: INSTALLATION
INSTALLATION
1. INSTALL POWER OUTLET SOCKET ASSEMBLY
(a) Align the protrusion on the backside of the socket with the groove of the cover. Then push the socket into the cover.
(b) Connect the connector.
2. INSTALL CONSOLE BOX SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Reassembly
3. INSTALL REAR CONSOLE ARMREST ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Reassembly
4. INSTALL CONSOLE BOX See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
5. INSTALL CONSOLE BOX REGISTER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Installation
7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Installation
8. INSTALL CONSOLE BOX PLATE See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
9. INSTALL CONSOLE UPPER PANEL ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
10. INSTALL FRONT CONSOLE UPPER PANEL GARNISH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Installation
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.