GS 350 AWD V6-3.5L (2GR-FSE) (2009)
/Page-1626003.png)
Installation
A760H AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITION SWITCH: INSTALLATION
INSTALLATION
1. INSTALL NEUTRAL START SWITCH ASSEMBLY
(a) Install the park/neutral position switch to the manual valve shaft.
(b) Temporarily install the bolt.
(c) Install a new lock washer with the lock nut.
Torque: 6.9 Nm (70 kgf-cm, 61 in-lbf)
(d) Turn the control shaft lever counterclockwise until it stops, and turn it clockwise 2 notches to set it to the neutral position.
(e) Remove the transmission control shaft lever.
(f) Align the neutral basic line with the switch groove, and tighten the bolt.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
