GS 350 AWD V6-3.5L (2GR-FSE) (2009)
/Page-1669002.png)
(a) Remove the 2 bolts and ground cable.
(b) Remove the bolt and engine wire bracket.
(c) Disconnect the sensor connector.
(d) Remove the 6 nuts, manifold and gasket.
23. REMOVE STARTER ASSEMBLY
(a) Disconnect the starter connector.
(b) Detach the terminal cap.
(c) Remove the nut and disconnect the starter cable.
(d) Remove the 2 bolts and starter.
