GS 350 AWD V6-3.5L (2GR-FSE) (2009)
(a) Install the transmission control switch to the shift lever guide housing.
NOTE:
Securely engage the claws.
2. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
(a) Apply MP grease to the hatched area of the shift lever guide housing as shown in the illustration.
(b) Install the shift lock control ECU sub-assembly with the 2 screws.
(c) Install the shift lever guide housing with the shift lever lock pin and a new shift lever nut.
-
Install the shift lever nut and lock pin after first engaging the 2 claws.
-
Securely engage the claws.
(d) Connect the transmission control switch connector to the floor shift assembly.
3. INSTALL POSITION INDICATOR SLIDE COVER