GS 350 AWD V6-3.5L (2GR-FSE) (2009)
Torque Converter: Testing and Inspection
AA80E Automatic Transmission
AA80E AUTOMATIC TRANSMISSION: TORQUE CONVERTER AND DRIVE PLATE: INSPECTION
INSPECTION
1. INSPECT TORQUE CONVERTER CLUTCH ASSEMBLY
(a) Inspect the one-way clutch.
(1) Set SST so that it fits into the notch of the converter hub and the notch of the outer race of the one-way clutch.
SST: 09350-32014
09351-32010
09351-32020
(2) Stand the torque converter up and turn SST.
SST: 09350-32014
09351-32010
09351-32020
Check that it rotates smoothly when turned clockwise and locks up when turned counterclockwise.
If necessary, clean the converter and check the one-way clutch.
Replace the converter if the one-way clutch still does not operate as specified.
(b) Determine the condition of the torque converter clutch.
(1) Check that the following conditions are met: