GS 350 AWD V6-3.5L (2GR-FSE) (2009)
(a) Support the differential carrier with a jack.
NOTE:
Do not drop the differential carrier.
(b) Remove the 3 bolts and differential carrier.
NOTICE:
-
Do not damage the installation surface when removing the differential carrier assembly.
-
The remaining oil may leak out when removing the differential carrier assembly.
Installation
DIFFERENTIAL: FRONT DIFFERENTIAL CARRIER ASSEMBLY (for 4WD): INSTALLATION
INSTALLATION
1. INSTALL FRONT DIFFERENTIAL CARRIER ASSEMBLY
(a) Support the differential carrier assembly with a jack. Temporarily install the differential carrier assembly to the engine assembly with the 3
bolts.
(b) Fully tighten the 3 bolts to install the differential carrier assembly.
Torque: 87 Nm (890 kgf-cm, 64 ft-lbf)
2. INSTALL ENGINE ASSEMBLY
See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
Components
DIFFERENTIAL: REAR DIFFERENTIAL CARRIER ASSEMBLY: COMPONENTS
COMPONENTS
ILLUSTRATION