GS 350 AWD V6-3.5L (2GR-FSE) (2009)
(a) Using SST and a press, install the case bearing inner race LH to the differential case.
SST: 09636-20010
-
Do not apply hypoid gear oil to a new bearing.
-
Do not deform the bearing cage.
-
Set the SST to the center of the differential case.
-
If the bearing is replaced, replace it and the bearing outer race as a set.
5. INSTALL FRONT DIFFERENTIAL CASE BEARING
(a) Using SST and a press, install the case bearing inner race RH to the differential case.
SST: 09636-20010
SST: 09950-60010
09951-00410
-
Do not apply hypoid gear oil to a new bearing.
-
Do not deform the bearing cage.
-
Set the SST to the center of the differential case.
-
If the bearing is replaced, replace it and the bearing outer race as a set.
6. INSTALL FRONT DRIVE PINION REAR TAPERED ROLLER BEARING
(a) Using SST, the bolt, nut (M12 X P1.25) and washer, install outer race of the rear tapered roller bearing.
SST: 09950-60020
09951-00710
09951-00720
NOTE:
Do not apply hypoid gear oil to a new bearing.
-
Bolt: M12 X P1.25, bolt length: 186 mm (09101-12159)
-
Nut: M12 X P1.25 (09101-12159)
7. INSTALL FRONT DRIVE PINION FRONT TAPERED ROLLER BEARING