GS 350 AWD V6-3.5L (2GR-FSE) (2009)
A760H AUTOMATIC TRANSMISSION: SPEED SENSOR: REMOVAL
REMOVAL
1. REMOVE SPEED SENSOR (NT)
(a) Disconnect the speed sensor connector.
(b) Remove the bolt and speed sensor.
(c) Remove the O-ring from the speed sensor.
2. REMOVE SPEED SENSOR (SP2)
(a) Disconnect the speed sensor connector.
(b) Remove the bolt and speed sensor.
(c) Remove the O-ring from the speed sensor.
Installation
A760H AUTOMATIC TRANSMISSION: SPEED SENSOR: INSTALLATION
INSTALLATION
1. INSTALL SPEED SENSOR (SP2)
(a) Coat a new O-ring with ATF WS and install it to the speed sensor.
(b) Install the speed sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(c) Connect the speed sensor connector.
2. INSTALL SPEED SENSOR (NT)