GS 350 AWD V6-3.5L (2GR-FSE) (2009)
/Page-2909002.png)
(d) Using a moulding remover, detach the 4 claws and remove belt guide LH.
HINT: Use the same procedure described for the LH side.
(e) Using a moulding remover, detach the 4 claws and remove the belt guide center.
(f) Detach the clip and remove the panel.
16. REMOVE NO.2 PACKAGE TRAY TRIM PANEL ASSEMBLY
(a) Detach the 5 claws and 3 clips.
(b) Disconnect the connector and remove the panel.
