GS 350 AWD V6-3.5L (2GR-FSE) (2009)
(d) Install the wiper arm and blade with the nut. Make sure that the wiper arm and blade comes to the position shown in the illustration.
Torque: 22 Nm (224 kgf-cm, 16 ft-lbf)
HINT: Hold down the wiper arm hinge with your hand while tightening the nut.
Specification:
7. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH
(a) Stop the wiper motor at the automatic stop position.
(b) Clean the wiper arm serration with a round file or equivalent.
(c) Clean the wiper pivot serration with a wire brush.
(d) Install the wiper arm and blade with the nut. Make sure that the wiper arm and blade comes to the position shown in the illustration.
Torque: 22 Nm (224 kgf-cm, 16 ft-lbf)
HINT: Hold down the wiper arm hinge with your hand while tightening the nut.
Specifications: