GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-1713005.png)
a. Attach the 3 claws and 2 clips to install the top garnish.
b. Push in the cover in the direction indicated by the arrow in the illustration. Then install the cover.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. CHECK SRS WARNING LIGHT
a. Check the SRS warning light.
6. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
