GS 350 RWD V6-3.5L (2GR-FSE) (2007)
b. Temporarily install the speaker by aligning the positioning pins of the speaker to the instrument panel.
c. Install the speaker with the 2 bolts.
HINT: Do not touch the cone part of the speaker.
2. INSTALL SPEAKER HOLE COVER
a. Attach the 4 clips to install the hole cover.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
Rear No.2 Speaker
Rear No. 2 Speaker