GS 350 RWD V6-3.5L (2GR-FSE) (2007)
A.
Technician A:
Push the park assist main switch in the switch box to turn the park assist ON. Then apply the parking brake and put the selector lever in the
"N" position.
B.
Technician B:
Stand approximately 10 in. (25.4 cm) from the left front clearance sonar sensor as shown.
C.
Technician A:
Verify the warning screens below are NOT displayed with Technician B in position.
If the warnings are still displayed, repeat steps 1-3.
If the warnings are NOT displayed, the initial calibration is complete.