GS 350 RWD V6-3.5L (2GR-FSE) (2007)
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY
Remove the front seat outer belt assembly.
3. REMOVE FRONT SEAT ASSEMBLY
Remove the front seat assembly.
4. REMOVE REAR SEAT CUSHION ASSEMBLY
Remove the rear seat cushion assembly.
5. REMOVE REAR SEAT HEADREST ASSEMBLY LH
Remove the rear seat headrest assembly RH.
6. REMOVE REAR SEAT HEADREST ASSEMBLY RH
Remove the rear seat headrest assembly.
7. REMOVE REAR SEAT HEADREST ASSEMBLY CENTER
Remove the rear seat headrest assembly center.
8. REMOVE REAR SEATBACK ASSEMBLY
Remove rear seatback assembly.
9. REMOVE CONSOLE BOX
Remove the console box.
10. REMOVE FRONT DOOR SCUFF PLATE LH
a. Using a moulding remover, detach the 5 claws and remove the scuff plate.
11. REMOVE FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedures described for the LH side.
12. REMOVE FRONT DOOR OPENING TRIM COVER LH
a. Using a moulding remover, detach the 3 claws and remove the trim cover.
13. REMOVE FRONT DOOR OPENING TRIM COVER RH
HINT: Use the same procedures described for the LH side.
14. REMOVE FRONT PILLAR GARNISH LH