GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-1093001.png)
Braking Sensor/Switch: Testing and Inspection
INSPECTION
1. INSPECT BRAKE PEDAL STROKE SENSOR ASSEMBLY
a. Inspect the brake pedal stroke sensor assembly. If any of the given occurs, replace the brake pedal stroke sensor assembly with a new one :
-
The surface of the brake pedal stroke sensor assembly is cracked, dented, or chipped off.
-
The connector or wire harness is scratched, cracked, or damaged.
-
The brake pedal stroke sensor assembly has been dropped.
