GS 350 RWD V6-3.5L (2GR-FSE) (2007)
NOTE: Do not to damage the brake tubes.
b. Using SST, connect the brake No.3 tube to the flexible hose.
SST 09023-00101
Torque: 15 N.m (155 kgf.cm, 11 ft.lbf)
c. Install the grommet to the body.
NOTE: Make sure that the grommet is installed correctly.
d. Temporarily tighten each brake tube to the connect positions of the actuator assembly with bracket as shown in the illustration.
e. Using SST, fully tighten each brake tube to the connect positions of the actuator assembly with bracket as shown in the illustration.
SST 09023-00101
Torque: 15 N.m (155 kgf.cm, 11 ft.lbf)
f.
Connect the actuator connector.