GS 350 RWD V6-3.5L (2GR-FSE) (2007)
2. ASSEMBLE SST
(a)
Install the punch assembly to part A of the overhaul handle as shown in the illustration.
SST 09230-01010
(b) While gripping the handle, adjust the stopper bolt so that dimension B is as specified below.
Dimension B: 8.4 mm (0.331 in.)
3. CAULK LOCK PLATE
(a)
Lightly press SST against the lock plate in the order shown in the illustration. After repeating this a few times, fully caulk the lock plate by
squeezing the handle until stopped by the stopper bolt.
SST 09230-01010
NOTICE: